Cat Mate Microchip Cat Flap (360)

The Cat Mate Microchip Cat Flap (360) is selective entry only. We would advise the Cat Mate Elite ID Disc Cat Flap with Timer Control (305), however, this works with ID Discs on your cat’s collar, but not implanted microchips.

Please remove all batteries for at least 1 hour, replace with new good quality alkaline batteries

No, the microchip information is retained by the cat flap

Remove 1 battery for a minimum of 2 minutes. Wait until lock drops, approximately 5 seconds – when the lock drops immediately remove a battery to prevent the lock rising.

Yes. This model is fully compatible with the Cat Mate ID Discs.

This model is fully compatible with the Cat Mate ID Disc found on our website

The red LED will flash once every 30 seconds

Good quality alkaline batteries should last for 9 – 12 months for 1 cat

This product will accept up to 30 cats

Remove the batteries for at least one hour. After one hour install new, good quality alkaline batteries, the red LED should flash and the catch should come up.

Yes, you require the Cat Flap Adapter Kit for Walls and Glass Panels (Part No. 361).

Yes, you require the Cat Flap Adapter Kit for Walls and Glass Panels (Part No. 361) and Elite Wall Liner (Part No. 308W).

Approximately 145mm X 145mm (5 6/8″ x 5 6/8″)

Yes, available on our website (Part No. 940).

If the solutions listed above didn’t fix your problem please get in touch via our Contact Us Page
or call 01932 700 001 so we can help out.